Topographical measurements on atomically flat surfaces at room conditions through scanning tunneling microscope, a didactic insight
DOI:
https://doi.org/10.15359/ru.33-1.3Keywords:
scanning tunneling microscope, HOPG, surfaces, Au (111), calibrationAbstract
One of the great advances in nanotechnology has been the development of the scanning tunneling microscope, a tool that permits the manipulation of atoms and molecules, the study of electron transport in a single atom, and the generation of images with atomic precision in electrically conductive surfaces. In this paper we describe the tunneling microscope, its operation, a calibration methodology, and how to make topographic measurements on flat surfaces with atomic resolution at room conditions. This is done from a didactic point of view, intended to assist new users or researchers unfamiliar with the technique. Depending on the type of measurement and calibration, we used two conductive samples, gold (111) oriented along the crystallographic direction, and highly oriented pyrolytic graphite (HOPG).
References
Arrandee. (2016). Arrandee - gold substrates - Au (111). [Online]. Recuperado de: http://www.arrandee.com/
Barth, J. V.; Brune, H., Ertl, G. y Behm, R. J. (1990). Scanning tunneling microscopy observations on the reconstructed Au (111) surface: Atomic structure, long-range superstructure, rotational domains, and surface defects. Physical Review B, 42(15), 9307-9318. Doi: https://doi.org/10.1103/PhysRevB.42.9307
Binnig, G. y Rohrer, H. (1987). Scanning tunneling microscopy - from birth to adolescence. Reviews of Moderns Physics, 59(3), 615-625. Doi: https://doi.org/10.1002/anie.198706061
Binnig, G.; Rohrer, H.; Gerber, Ch. y Weibel, E. (1982). Surface Studies by Scanning Tunneling Microscopy. Physical Review Letters, 49(1), 57-61. Doi: https://doi.org/10.1103/PhysRevLett.49.57
Chang, H. y Bard, A. J. (1991). Observation and Characterization by Scanning Tunneling Microscopy of Structures Generated by Cleaving Highly Oriented Pyrolytic Graphite. Langmuir, 7(6), 1143-1153. Doi: https://doi.org/10.1021/la00054a021
Horcas, I.; Fernández, R.; Gómez-Rodríguez, J. M.; Colchero, J.; Gómez-Herrero, J. y Baro, A. M. (2007). WSXM: a software for scanning probe microscopy and a tool for nanotechnology. Review of Scientific Instruments, 78(013705), 1-9. Doi: http://aip.scitation.org/doi/10.1063/1.2432410
Novoselov, K. S.; Geim, A. K; Morozov, S. V.; Jiang, D.; Zhang, Y.; Dubonos, S. V.; Grigorieva, I. V. y Firsov, A. A. (2004). Electric Field Effect in Atomically Thin Carbon Films. Science, 306(5696), 666-669. Doi: https://doi.org/10.1126/science.1102896
Riquelme Ballesta, J. J. (2008). Propiedades mecánicas y transporte electrónico en nanoestructuras metálicas a bajas temperaturas. (Tesis doctoral). Universidad Autónoma de Madrid, España. Recuperado de file:///C:/Users/CARLOS~2/AppData/Local/Temp/documentop.com_propiedades-mecanicas-y-transporte-electronico-en-_598bbefd1723dd5c695f0e93.pdf
Rubio-Verdu, C.; Saenz-Arce, G.; Martínez-Asencio, J.; Milan, D. C.; Moaied, M.; Palacios, J. J.; Caturla, M. J. y Untiedt, C. (2017). Graphene flakes obtained by local electro-exfoliation of graphite with a STM tip. Physical Chemistry Chemical Physics, 19(11), 8061-8068. Doi: http://dx.doi.org/10.1039/C6CP07236D
Sabater, C. (2013). Theoretical and experimental study of electronic transport and structure in atomic-sized contacts. (Tesis doctoral). Universidad de Alicante, España. Recuperado de https://www.researchgate.net/publication/257692003_Theoretical_and_experimental_study_of_electronic_transport_and_structure_in_atomic-sized_contacts
Sáenz-Arce, G. (2011). Estudio de estructuras de tamaño atómico mediante un STM con detección resonante de fuerzas. (Tesis doctoral). Universidad de Alicante, España. Recuperado de https://www.researchgate.net/publication/320068596_Study_of_Atomic-Size_Structures_using_a_Scanning_Tunneling_Microscope_with_Force_Resonant-Detection
SPI Supplies (2017). SPI Supplies - HOPG. [Online]. Recuperado de http://www.2spi.com/category/hopg/substrates/
Untiedt, C.; Yanson, A. I.; Grande, R.; Rubio-Bollinger, G.; Agraït, N.; Vieira, S. y Ruitenbeek, J. M. van. (2002). Calibration of the length of a chain of single gold atoms. Physical Review B, 66(85418), 1-6. Doi: https://doi.org/10.1103/PhysRevB.66.085418
Downloads
Published
Issue
Section
License
Authors who publish with this journal agree to the following terms:
1. Authors guarantee the journal the right to be the first publication of the work as licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
2. Authors can set separate additional agreements for non-exclusive distribution of the version of the work published in the journal (eg, place it in an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
3. The authors have declared to hold all permissions to use the resources they provided in the paper (images, tables, among others) and assume full responsibility for damages to third parties.
4. The opinions expressed in the paper are the exclusive responsibility of the authors and do not necessarily represent the opinion of the editors or the Universidad Nacional.
Uniciencia Journal and all its productions are under Creative Commons Atribución-NoComercial-SinDerivadas 4.0 Unported.
There is neither fee for access nor Article Processing Charge (APC)
